I have a mostly stock d15b7 (just i/h/e for now) on a chipped p06 ecu. I have my distributor timing set to stock using the stock tune (not on any tune I made, on the tune that came with the stock ecu) following the repair manual. I was just wondering if I could get a ballpark for timing numbers at full throttle between 2000-7000RPM. I use HTS and I got a base map through HTS and went off of that. I have my AFR dialed in throughout the whole RPM range at all throttle positions and now I'm just curious what to set timing at. Currently I'm running 22 degrees after 3500RPM at full throttle. I can post pictures of my current timing table if that will help any of you. Not expecting exact answers, just some insight on some round about numbers.