Honda D Series Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
Has anyone ever taken zc axles and mated them up to a dx transmission by taking the carrier out of the zc transmission and bolting the ring gear from the dx onto the zc carrier for the bigger spline to work????....

I have a 1991 Honda civic hatch and i need the dx gearing for the track i race at and these 3 piece axles would help allot if i got get them mated up correctly.

i use the second gear only out of the dx transmission 1.894 and 3.88 final drive
 

·
Registered
1996 Civic Type DX
Joined
·
4,167 Posts
Will not work in a DX case. You would have to turn the ZC diff bearing hubs down to 35mm which would make them too weak due to the larger ID.
 
1 - 5 of 5 Posts
Top