Hey guys so i have been running my y8 at 8psi on stock internals for a year and a half the motor now has 133,000 original miles on it and now i have just started to smell the burning oil coming on from the rings. My plan is to rebilud the the whole engine except the tranny. My plan for it is to get some good power out of it put leave it at the daily driver level. I dont drive it int he winter so i was planing on this being the last summer for it and buying the parts for the rebiuld over the summer and pulling it out 4 the winter and working on the motor. What setup would you recomend for me i want to get close to the 350hp range and have a good clean performance. Just to go around and get peoples opinions what kind of parts/brands blah,blah,blah do you favor over somthing else. a lil update on the turbo system atached right now is 450cc DSM, Crome Pro, .50/.60 Garrett T3/T4, Rev Hard manifold, Tial 38mm Wastgate.