Honda D Series Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
87 Posts
Odd. that the correct part number (12251-P2J-004) for the Y8 head gasket, same part number I got from my Honda dealer for mine and it was the 3-layer style.

I sadly think you may have been screwed...
 

·
DIY Guru
96 Ranger-stock
Joined
·
637 Posts
Miss labeled A6 head gasket?

Looking thu my suppliers (not oe honda) it looks that the Y5, Y7, Y8 all have MLS HG

and the A6 has a composite.
 

·
the artist formerly known as drexelstudent11
Joined
·
3,983 Posts
definitely a counterfeit - Honda HG's come without cardboard backing, loose in a bag

like this:
 

·
the artist formerly known as drexelstudent11
Joined
·
3,983 Posts
I reported the auction, so noone else will get burned by this bs
 

·
Tape-R taper/driver
EC3, ED8, ED9, EE5
Joined
·
574 Posts
definitely a counterfeit - Honda HG's come without cardboard backing, loose in a bag
My A6 composite gasket came direct from Honda on a piece of cardboard and vacuum wrapped. Was purchased last week.
 

·
the artist formerly known as drexelstudent11
Joined
·
3,983 Posts
My A6 composite gasket came direct from Honda on a piece of cardboard and vacuum wrapped. Was purchased last week.
okay, let me amend: honda MLS gaskets come as I described

(why'd you buy a superseded, TSB'd away composite gasket from honda anyway!?)
 
1 - 12 of 12 Posts
Top