Honda D Series Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
560 Posts
Discussion Starter #1
I have a D16Y7 engine in my 97 LX and I just swapped a D16Z6 head into it. I just purchased the automatic D16Y8 ECU for it and am now looking for a matching wiring harness. My question is, does it matter if the harness is from an auto or a manuel car? Anyone have a extra D16Y8 harness sitting around that they want to sell? If not I'll just pick up one of the ones off ebay. Thanks

Patrick
97 Civic LX
 

·
Registered
Joined
·
417 Posts
I don't know if that will work considering you swapped an obd1 head onto an obd2 car and bought an obd2 ecu. Also, you may have to wire in a knock sensor, but I'm not sure, someone correct me please...
 

·
Registered
Joined
·
560 Posts
Discussion Starter #3
kiloviper said:
I don't know if that will work considering you swapped an obd1 head onto an obd2 car and bought an obd2 ecu. Also, you may have to wire in a knock sensor, but I'm not sure, someone correct me please...
All the connectors were the same except the distributor, so I just used my D16Y7 distributors guts. Yeah I need to put a knock sensor in my block also.

Patrick
97 Civic LX
 
1 - 3 of 3 Posts
Top