[SpoolinSol]

I need to know which way the eagle rods hang so i can have the machine shop press in my wrist pins... I thought the number stamped on the rod faced towards the front on the motor; but can anyone confirm this? Thanx!

 

[SpoolinSol]

if theres an oil squirter hole, then that faces the intake side when installed in the motor

why WOULDN'T there be an oil squirter hole? I will let the machine shop know that, thanx, and rep 4 you!

 

[SpoolinSol]

efing crx; i know which way the pistons go, but i wasn't sure which way the RODS were suppose face...

inh; thanx again man! I'll go talk to the machine shop tomorrow and get 'em pressed in...