Honda D Series Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
I have a t3 .50 trim and at 11psi I am making 233whp and 238tq. I want to push 15psi or so and get close to 300whp. My question is which turbo,trim and ar should I run to do this? I would still like to keep full boost at the lowest rpm's possible without the turbo struggling.
 

·
Registered
Joined
·
414 Posts
redhatch said:
I have a t3 .50 trim and at 11psi I am making 233whp and 238tq. I want to push 15psi or so and get close to 300whp. My question is which turbo,trim and ar should I run to do this? I would still like to keep full boost at the lowest rpm's possible without the turbo struggling.

I have seen this thread somewhere else...


300whp get a T3 T04E 50-60trimm .48 or .63ar and you should have no problem hitting 300whp


i did it on a 54trimm @ 17psi i was just shy of 300whp
 
1 - 3 of 3 Posts
Top