Honda D Series Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter #1
Looking to build a either a d15 or a d16 soon. I may stay with the d15 so i can have a high reving motor... My brother is going to do the porting. I am going to be making the intake manifold using the CBR 954 ITB's. Now I am looking at a low budget piston and rod combo. Also a nice aftermarket cam, vavle springs, retainers etc...

So I guess who makes the best, cam, cam gear, springs, and retainers.. I belive i might just use the old school 1.6 ls d-series pistons for high compression with shot pingged stock rods.
 
1 - 3 of 3 Posts
Top