Honda D Series Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
475 Posts
Discussion Starter #1
ok this kids dad has a shopblah blah and has a hydrolocked y8 and y7 motor complete. im going to go check ou the y8 head and intake manifold complete for $100. thought thats not to bad. the y8 has 61,000 miles and it was hydrolocked. what should i check out on the head to make sure its still ok? take the valve cover and look for anything certain. thanks guys
 

·
Registered
Joined
·
475 Posts
Discussion Starter #3
well ive honestly never seen a bent valve...so ill pull the head and just check. im assuming its quite easily to notice a bent valve.he will prob say anther $50 for the ecu. what good would the ecu be...?obd0 crx im in hehe unless i could sell it to someone here who needs it. thanks
 

·
Banned
Joined
·
3,428 Posts
and the oil pan too and the pickup...and any sensors that you can pull off the block
just because you never know...
 
B

·
Guest
Joined
·
0 Posts
tell him $100 for the WHOLE y8 because no one will give him more than that for a Hydrolocked engine. you really should send the head out to the machine shop regardless of what you see with your own eyes.
 
1 - 6 of 6 Posts
Top