Honda D Series Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
280 Posts
Discussion Starter #1
hey guys i just joined here today.

im having a problem finding out what car my turbo came off of. i need to know so that i can order a gasket for it and the o ring seal on the compressor (which ripped as i was rotating it). i can make a gasket if i have to, but the o ring i definetly need to buy.

the turbo is a garrett T3

cust p/n is: 1367867

ato p/n is: 465143 3002

s/n is: RE0923A

any help would be greatly appreciated. or if someone could direct me to a site where i could look it up, that would be great too.

thanx

matt
 

·
Registered
Joined
·
280 Posts
Discussion Starter #2
here is a pic of the compressor housing if it helps:



when i search i find nothing on the Garrett T3 with .52 A/R. is it a rare turbo or somethin?
 

·
Registered
Joined
·
280 Posts
Discussion Starter #4
csaddict said:
I believe some of the Volvo's were .52 A/R housings. All the gaskets should be the same due to the fact that the center section is very standard for the most part.

yea but the gasket is least of my worries, like i said i could just make a gasket. but i need the o ring or seal or whatever it is. ya know when you take off the compressor housing and there is that large o ring around it?
 

·
Registered
Joined
·
280 Posts
Discussion Starter #5
yep, it was the volvo, the 1988-89 760's had the .52 compressor A/R. thanks for the help

matt.
 
1 - 5 of 5 Posts
Top