Honda D Series Forum banner
1 - 20 of 32 Posts

·
Registered
95 civic ex coupe
Joined
·
3,870 Posts
Discussion Starter · #1 · (Edited)
went to the track....got some short vids

heres a link to 2 short vids of me racing...
http://s33.photobucket.com/albums/d69/siregcivic/?action=view&current=meracing.flv


perris ca had a event last sunday and i brought my car ... wheelspin ownz me

first run
rt. 245
60' 2.357
1/8 9.759
mph 81.45

second run
rt. 167
60' 2.307
1/8 9.703
mph 84.32

then the damn tree broke like always and i dropped the tire pressure from 18 to 14 and beat a 2nd gen eclipse at 23 psi and raced a 93 gsr powered hatchie with slicks and nos and lost by a car and a half and was eliminated from the competition...

wish i could have gotten more timeslips.. it pretty much pissed me off.. payed 30 bucks to get 2 timeslips.. i just left my friend said they never fixed teh tree.. oh well

my setup
d15z1 block
d16y8 head
saab t3 .42.48 at 14psi
440 dsm's
tuned on uberdata
still on crap dx trans
 
  • Like
Reactions: IdontWannaHonda

·
D-series Janitor
Front Engine Dragste
Joined
·
1,220 Posts
wow, clean up the 60ft and the MPH is there to drop a second.
 

·
Registered
95 civic ex coupe
Joined
·
3,870 Posts
Discussion Starter · #4 ·
wow, clean up the 60ft and the MPH is there to drop a second.
no i was spinning most of 2nd.. on street tires 185 60 14

i calculated the mph in the 1/8 it equaled out to low 13's in the 1/4
 

·
Registered
Joined
·
1,004 Posts
r/t...336
60'...2.292
330...6.391
1/8...9.796
mph...70.91
1000...12.745
1/4...15.23
mph...90.66

Is what i ran N/A this saturday, you can tell easily by your 1/8th mph that your having traction issues lol
 

·
Lifetime Awesome Member
'89 CRX HF
Joined
·
25,544 Posts
i calculated the mph in the 1/8 it equaled out to low 13's in the 1/4
where? most calculators would say mid 14s with those times...

my 9.0 in the 1/8th calculated out to a 14flat, although i know i would have pulled faster than that. all those calculators are set up for rwd vehicles that dont trap as high as a fwd
 

·
Registered
95 civic ex coupe
Joined
·
3,870 Posts
Discussion Starter · #8 ·
this ones pretty accurate... just put in what you did.. the 1/8 and hit calculate.. or what i did and put the speed in...

i put 81 in and it = 13.30.. i put 70 in and it = 15.39

just fill in one column and it will figure it out..

http://www.wallaceracing.com/etcalc.php
 

·
Registered
Joined
·
1,004 Posts
this ones pretty accurate... just put in what you did.. the 1/8 and hit calculate.. or what i did and put the speed in...

i put 81 in and it = 13.30.. i put 70 in and it = 15.39

just fill in one column and it will figure it out..

http://www.wallaceracing.com/etcalc.php
i typed in 70.91 in the 1/8th and i got this

60 Foot 2.11
330 Foot 6.10
660 Foot 9.59
660 MPH 70.91
1000 Foot 12.61
1/4 Mile ET 15.19
1/4 Mile MPH 87.22

87mph? i trapped 90.6 soooooooooooooooooooo......
 

·
Lifetime Awesome Member
'89 CRX HF
Joined
·
25,544 Posts
this ones pretty accurate... just put in what you did.. the 1/8 and hit calculate.. or what i did and put the speed in...

i put 81 in and it = 13.30.. i put 70 in and it = 15.39

just fill in one column and it will figure it out..

http://www.wallaceracing.com/etcalc.php
lol, i put in my 9.0 at 83mph and it said i would run a 16.7 @ 79...

so i was going to slow down after the 1/8th mark, lol
 

·
Banned
Joined
·
752 Posts
lol, i put in my 9.0 at 83mph and it said i would run a 16.7 @ 79...

so i was going to slow down after the 1/8th mark, lol
It must be the sandbagger's calculator.
 

·
D-series Janitor
Front Engine Dragste
Joined
·
1,220 Posts
FWD traps higher than RWD normally. Those calculations are set up with RWD in mind.
thats only because they don't 60ft as good

no i was spinning most of 2nd
What are you smoking? Your 60ft is terrible. Go back out on slicks and cut a better short time.

60' 2.307
1/8 9.703
mph 84.32
Back when I first put my falcon together it went 81 mph . . . and went 8.60s with a 1.85 60ft on 26x10 ET Streets.

http://videos.streetfire.net/search/falcon/0/b8a2d834-7909-4c57-a810-f58db8185498.htm
 

·
Registered
95 civic ex coupe
Joined
·
3,870 Posts
Discussion Starter · #15 ·
What are you smoking? Your 60ft is terrible. Go back out on slicks and cut a better short time
well... im using a 8:1 compression motor with a t3 .42 .48.. my full throttle launch was set way way too low 4k.. i wasnt building any boost off the line at all.. and when i did build boost.. i would spin.. top of first majority of 2nd and hook up in 3rd. i mean i was going 84 through the trap.. i could have trapped a low 14 with that in the 1/4

im going back to get my full throttle launch set to 5k sometime this week and have vtec set so it will turn on when i go past engagement wich is 4600 that way it will help and i can build some boost off the line

and get slicks next time out:TU:
 

·
Registered
95 civic ex coupe
Joined
·
3,870 Posts
Discussion Starter · #17 ·

·
Registered
95 civic ex coupe
Joined
·
3,870 Posts
Discussion Starter · #18 ·
up top.. added 2 short vids
 

·
Neighborhood Asshole is Back!
02 BMW; 00 Civic EX
Joined
·
1,892 Posts
you sure that eclipse wasnt on 2.5 psi?
 

·
Registered
95 civic ex coupe
Joined
·
3,870 Posts
Discussion Starter · #20 ·
you sure that eclipse wasnt on 2.5 psi?
yea im sure

he couldnt drive i guess.. i smoked him.. and then another hathchie with slicks walked like half track.. idk he said he was at 25 with a t28 and it was built on street radial.. cheaters whatever u call them..
 
1 - 20 of 32 Posts
Top