Honda D Series Forum banner

1 - 6 of 6 Posts

·
Registered
rx7 93
Joined
·
19 Posts
Discussion Starter #1
what be the best way to go webers and nitrous or webers and turbo im building a d 16 and have the turbo and have the nitrous but dont know what to build anybody know if somebody have do any of this thnak
 

·
Boost Gets You Laid
Del Sol
Joined
·
4,402 Posts
If you're refering to boosting ITB's it can be done but a major PITA.

Skunk2 mani or something similar to that + spray is good.

If you're going turbo... direct those questions in the turbo section
 

·
Registered
Joined
·
1,281 Posts
if u have the webers on hand, i think the mods u need to do is seal it, the throttle shafts etc etc to handle boost and not leak...

either check on oldschool blow thru weber turbo set-ups or sum vw aircooled places hehe
 

·
Registered
Joined
·
512 Posts
Nitrous, direct port at that (make sure it's a carb compatible kit). Wet kits won't work on Webers, dry kits never work on carbs unless you jet them waaaaayyyyy rich and run like a 25 shot.
 
1 - 6 of 6 Posts
Top