Honda D Series Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,885 Posts
its definitely more of a challenge to weld onto cast but it is doable i've seen a few peices done. and as mentioned above, people usually weld an elbow (a 90* bend) onto the top portion of the hf manifold and mount the gate off the elbow(horizontal to the ground)

-Luke
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top