Honda D Series Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,885 Posts
its definitely more of a challenge to weld onto cast but it is doable i've seen a few peices done. and as mentioned above, people usually weld an elbow (a 90* bend) onto the top portion of the hf manifold and mount the gate off the elbow(horizontal to the ground)

-Luke
 

·
Black Dynamite
1991 HONDA Civic
Joined
·
5,880 Posts
its definitely more of a challenge to weld onto cast but it is doable i've seen a few peices done. and as mentioned above, people usually weld an elbow (a 90* bend) onto the top portion of the hf manifold and mount the gate off the elbow(horizontal to the ground)

-Luke
that's what I've seen most HF's look like
 
1 - 6 of 6 Posts
Top