Honda D Series Forum banner

Want 96-98 frontend back on! HELP!!

619 views 16 replies 6 participants last post by  99EJ6T 
#1 ·
Ok so i have a 96 civic hatch an when i got it there was a 00 frontend on it. well lastnight i traded with a friend an come to fine out they cut the taps. Witch i didnt know u had to do when doing the conversion.

So now idk wat to do!! i want the 96-98 frontend back on!! So wat am i to do guys??

I need your help on this one

thanks,
Nate
 
#2 ·
bump for some help
 
#4 ·
I can see welding new tabs on but a new core support??

Would that be way to much 2 do?
 
#6 · (Edited)
Did they cut the tabs completely off or just cut a section out and drill a new hole?

Edit: I just looked at your build thread and they just cut a section out just cut a small square and weld it back in the void.
 
#10 ·
i suggest welding the tabs but if you got creative with some thick sheetmetal and self tapping screws you could make something work. again, i suggest welding but this would be an option for you.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top