* Custom built, exclusive Blaast hybrid turbo assembled from a combination of NEW and reman to new components that are 100% genuine and in respect, if not exceeding all original requirements.
6 months warranty.
compressor wheel: 56.6 / 74.9 mm 57 trim
compressor housing: T04E 0.70 a/r, 4" / 2½"
center section: oil cooled journal bearings
Turbine wheel: 68 trim (stage1)
Turbine housing .63 a/r, 7 bolts outlet flange
you gotta watch those egay knockoffs,
even if you buy a used name brand, unless you can see it first then consider it a possible rebuild candidate. I know plenty of people who have taken the egay plunge and wished they never had.
He came to find out that it was a hybrid ebay/ garrett turbo posing as a real garrett thats why its so cheap but would probably be fine its a ebay hotside mated to a garret compressor but have now clue about the chra
Hey guys i just bought a civic with a built d16 turbo engine with the common vitara setup, its been running fine but the manifold was cracked badly and blowed like hell also looked like a 10year old welded the manifold so the quality is s*it. im not a bad welder and considering making a new...
So every tuner around here is just stupid expensive. Im boosting my car Its a 96 civic cx with a d15b vtec swap.p28 ecu with the obd1 to 2 jumper harness... garret turbo internal wg with a 5lb spring. Hondata.v3 is on its way in the mail. I can chip it myself piece of cake . Is there anyway to...
So am in the process of building a FI 99 civic hatchback
the car was in my family since day 1 of its life as a DD but as it grow older and start breaking up i bought the car wanting to make a fun little car
the car came with the D15z4 engine and automatic transmission and weired ecu...
D16z6/y7 mini me turbo build help!!
I’m planning on building a 500+ HP D16 and I put together a parts list. Can anybody let me know if I am missing anything on the list. Thanks for the help in advance. I know not everything is a necessity but I there are a few bells and whistles I want to add...
Okay so I just caught part of my car on fire and melted the paint off the driver door... Had my pumps off my fuel cell and put them in a plastic container full of e85, stupid I know.
So my question is... Can I have my in line 255 feeding my in line 044 on constant voltage strait from the...