Honda D Series Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
114 Posts
Discussion Starter #1
ok so my 4th gear got sheared off in my Si cable trans and I was wondering what I should do about it? like could I use parts from another trans to fix this one or put some of the parts in another trans like a DX because they are a dime a dozen, I dont really wanna try and find another Si trans so what should I do?

-Jason

P.S. please help I'm running a shitty 4spd STD trans right now it has the same RPM in 4th at 55mph as my Si did in 5th at 55mph help its really slow!
 

·
Registered
1991 crx dx
Joined
·
221 Posts
talk to the guru himself
 

·
Brokedick Millionaire
Joined
·
40,630 Posts
if you did shear 4th gear, the shrapnel (sp) likely damaged 3rd and 5th gearsets, if not more.
 

·
Registered
Joined
·
114 Posts
Discussion Starter #9
DX and SI gearing are the same. difference is the final drive
My ring gear and diff look fine so if this is true I could just throw my diff and final drive in a DX trans after looking over and cleaning them of course!? any difference between the diff bearings and such? LMK

-Jason
 

·
Lifetime Awesome Member
'89 CRX HF
Joined
·
25,544 Posts
My ring gear and diff look fine so if this is true I could just throw my diff and final drive in a DX trans after looking over and cleaning them of course!? any difference between the diff bearings and such? LMK

-Jason
not gonna happen...

just run the DX trans, they arent that far apart from each other
 
1 - 11 of 11 Posts
Top