[Guest]

Hey, i was just wondering if the arrows on the cams are suppose to be pointing up at the same time when resetting the timing. Appreciate all the help.
-Aaron-

 

[Guest]

Hey, i was just wondering if the arrows on the cams are suppose to be pointing up at the same time when resetting the timing. Appreciate all the help.
-Aaron-

Yes

 

[Guest]

yes but you better make sure your block is TDC before you put both of the cams at that position...

 

[Guest]

Wich mark on the crank pulley is TDC? I believe on the SI motor that was in my car it was the white mark, is that the same for all honda motors?

 

[Guest]

OH and one more question does anyone know what the ignition timing on the DOHC ZC shoulc be? Like how many degrees before or after TDC?

 

[Guest]

should be tdc with allen wrenches locking the cams in the right posistion, if i remember correctly

 

[crxrocks]

 

[crxrocks]

should be tdc with allen wrenches locking the cams in the right posistion, if i remember correctly

BTW> You replied to a reallllllly old post. ;-)

 

[91dohccivic]

line the lines up one the cams cause sometimes the holes in the cams may make it like 1 tooth off

 

[Trench_Rat]

stock ignition timing is 16 degree btdc