http://www.heeltoeauto.com/tech/dseries/dseries1.shtml
For all you guys wanting specs on pistons.....VERY USEFUL.
For all you guys wanting specs on pistons.....VERY USEFUL.
The Super D-Series Piston Comparo
1 - 4 of 4 Posts
Joined
·
2,858 Posts
This only gets posted once a week 
But thanks anyways.
But thanks anyways.
oh doh.................I was so chuffed with myself cause I founds dit.........lol.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
I need cam card Bisimoto 2.4 Turbo
General TechHello, I need the card of the bisimoto 2.4 turbo cam, without wanting to lose it, someone could help me I sent bisimoto an email 15 days ago but I haven't received a reply and I want to finish my car- 2
- 37
-
New d15b1 any advice?
General TechHey guys I just picked up a new project. Its a 91 civic with the d15b1 and its low miles around 55k. Was thinking a mild single cam turbo build. But this is my first honda that isnt a big red. any advice on what the d15s like? I've built boosted cars and trucks in the past. But I'm a virgin to...- 4
- 137
-
BackwoodsHobbit · updated
-
Idle surging after MPFI swap
General TechRecently did a dpfi to mpfi swap on my 90 DX Civic hatch. Got it running. Things are good. Everything came off a d16a6. With the TPS sensor plugged in, it runs great, idles right. Then the second any throttle is applied or after sitting for a good minute, the idle surges up, then down and almost...- 15
- 666
-
ZippuDoozy · updated
-
D15Z6 running on D16Y8 ecu
General TechHi I have civic 2000. Originally it has D16Y8. But for some reasons I have to swap D15Z6. But all the wiring and intake remains of D16Y8. Ecu is also of D16Y8. Now I want to know will this ecu damage my engine? Also I am getting very low fuel economy like around 6 km per liter. I was thinking...- 5
- 167
-
HasanKhurshid29 · updated
-
99-00 D16Y8 with 96-98 head
General TechHey Guys, I'm new to the forum, I'm an older Honda tech now retired. Just reaching out regarding a head swap I did on my wife's car. Its a 99EX Manual. Sent the head off to machine shop to discover it had a crack. I picked up another used head thinking hey all 96-00 D16Y8's are the same...- 7
- 379
Join now to ask and comment!