Honda D Series Forum banner

1 - 3 of 3 Posts

·
Registered
see above
Joined
·
4,258 Posts
Discussion Starter #1 (Edited)
i was looking around to see if the coils and the ignitors are the same through out some dist. and i can not find a exploded diagram or part numbers for the first gen integra dist. like majestic... any help.. may seem like a dumb ? but my brain is fried from searching.
Cliff notes:
im talking about switching parts from other dizzy to replace the first gen integra (d16a1) broken parts
 

·
Registered
see above
Joined
·
4,258 Posts
Discussion Starter #3
thats what i was getting at, i just picked up a td-03 out of a junk yard (first gen integra)for the dual cam jdm zc that i have, being as i have an obd-0 ecu that is chipped for the motor, i needed the accommodating sensors in order to run it obd-0.

if the dizzy is bad, *coil,ignitor* i was hoping to rebuild the obd-0 zc dizzy and make it work that way, just something that was floating around in my head... im always trying to make a backup plan before this actually go wrong. =P
 
1 - 3 of 3 Posts
Top