Honda D Series Forum banner
1 - 10 of 10 Posts

·
Registered
91 civic dx sedan
Joined
·
351 Posts
Discussion Starter · #1 ·
ok i buoght a used t-3 turbo its says it's a garrett (will post pics later today when i get home) ..... heres my question there is no down pipe flange on it just the outlet do i need to but a specific down pipe for this turbo ?and where would i place the waste gate if I'm using a hf manifold I've seached and couldnt find answers to these questions..... and i know :TTIWWP:
 

·
Registered
91 civic dx sedan
Joined
·
351 Posts
Discussion Starter · #4 · (Edited)
could i use this downpipe with my turbo.... the exhaust outlet has no flange to bolt to so i'm assuming its a v-flange type
 

·
Registered
91 civic dx sedan
Joined
·
351 Posts
Discussion Starter · #9 ·
i still might the shipping for anywhere in the lower 48 is like $75 just looking into some things will take better pics tonight and measurments
 

·
Registered
Joined
·
822 Posts
It almost looks like the turbine side has a Vband style flange... so you might be able to use that DP
The compressor obviously has a .42 AR. That's all of the information I can decipher.
 
1 - 10 of 10 Posts
Top