Honda D Series Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
760 Posts
make sure it is a sparkplug socket. If you put like an impact 5/8 socket the walls of the socket might be too big!
 

· Registered
Joined
·
131 Posts
Discussion Starter · #7 ·
make sure it is a sparkplug socket. If you put like an impact 5/8 socket the walls of the socket might be too big!
good advice. im almost positive my 5/8 is for plugs though, but maybe not.

on a similar note, does anyone know how to aim headlights on a crx?
... couldnt find the skrew...
 

· Live,love,laugh,be real
07' Odyssey 07'Magnum
Joined
·
10,290 Posts
i use a piece of rubber hose to pull them out once there lose and also to install them... then i tighten them up with a wrench...

i know you didnt ask but there ya go... :)
 

· Registered
Joined
·
1,555 Posts
ONLY use spark plug sockets! The have a plastic spacer-thingy in them so you don't damage the top of the plug (part that the wires atach too) its worth the $5 to get teh right socket... and torque em to 14 ft/lbs too...
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top