If you guys remember, my Magnecor KV85 spark plug wires werent seating properly
on the valve cover...
before pics:
I finally solved the plug wire issue. I went to Karbelt store and tried a set of
8.5mm MSD wires, what do you know, not only were they not seating properly, they were also a lil too short !!
So they let me try a set of Taylor 8mm Spiro pro wires in red, and what do you know ? They fit like a charm !
And they were $60 cheaper than the shitty magnecor wires !
Need a second opinion here:
I have an 89 CRX Hf that had working AC, not amazing, but it worked. I assume it was R12 as there were no converter nipples going on.
A while back someone hit let head on, broke the radiator and mangled the condenser, but didn't rupture it.
I decided since I was...
Hey all,
Long time reader, first time poster.
So, I have a 1995 Civic Ferio Vi, with a D15B (two stage vtec) engine in it. Imported from Japan, so all JDM parts.
But... Something backed off the bolt on my main pulley (AKA harmonic balancer), and it got damaged. So, now to find one.
Partsouq...
For you say anything I've done the search of done four searches and after getting to the 20th page I give up . My plan is to use a D15B7 and put the Max peating rod rods which are higher at 134.5 mm which is only at half a millimeter larger than stock rods. Along with this I plan for a z6 head...
A forum community dedicated to the Honda D Series engine owners and enthusiasts. Come join the discussion about performance, builds, reviews, turbos, and more!
