[brastone]

so the y7 started knocking and it turns out that after i pulled the pan to check the bearings and found nothing, with a magnet in the pan i pulled three parts of a snap ring. What now. The problem is that my scat rods are floating and my nippon pistons are also floating so my pistons were cut for snap rings

 

[brastone]

i figured it fucked the cylinder wall also so i picked up a y8 complet accept for 4 rocker arms and the bolts for the cam retainer just gona swap my head over and call it good for now. also i did a comp test and aftre 3 turns all 4 cylinders showed at 148 is that ok or not?

 

[brastone]

i have an adjustabel cam gear and a stage two cam could the reason for low numbers be overlap cuz those pistons have a hella dome with molly rings i just wonder wtf compression calculater says 13 to 1 whats to expect of that?