Silicon hoses?
1 - 5 of 5 Posts
They should, yes.
Yes ...
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Honda civ 92 wont crank
General TechSo I'm going to start that I need a new starter and dizzy for sure but cause I hook up a z6 harness to a y7 block ? And I'm thinking about just getting a z6 block and putting it in- 2
- 57
-
Alexhonda92 · updated
-
99-00 harnesses on 96-98?
General TechIf you had a 98 ex and swapped out the harness, dash harness, and ecu with the 99 ones, would it work? If not, how do you make it work?- 4
- 110
-
Need second opinion on AC problem in CRX.
General TechNeed a second opinion here: I have an 89 CRX Hf that had working AC, not amazing, but it worked. I assume it was R12 as there were no converter nipples going on. A while back someone hit let head on, broke the radiator and mangled the condenser, but didn't rupture it. I decided since I was...- 4
- 244
-
JoelEspinoza · updated
-
D15B Pulley/Harmonic Balancer help
General TechHey all, Long time reader, first time poster. So, I have a 1995 Civic Ferio Vi, with a D15B (two stage vtec) engine in it. Imported from Japan, so all JDM parts. But... Something backed off the bolt on my main pulley (AKA harmonic balancer), and it got damaged. So, now to find one. Partsouq...- 0
- 74
-
robbieg · updated
-
Vitaras in a b7! so many questions ZERO answers
General TechFor you say anything I've done the search of done four searches and after getting to the 20th page I give up . My plan is to use a D15B7 and put the Max peating rod rods which are higher at 134.5 mm which is only at half a millimeter larger than stock rods. Along with this I plan for a z6 head...- 21
- 251
Join now to ask and comment!