Honda D Series Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Hi, i did a full rebuild on my D16A6 CRX 88 with everything new. (Mitzuma Set with Pistons). The engine runs perfect now and is complete dry. Did drive about 1000km now. No smoke from exhaust.
Only problem i have is a very small noise coming from the direction of the pulley. I have no A/C or Servo. Its like something scratches every turn the engine is doing. I removed the belt from the alternator and it was same. The noise is same as first start, didnt get better or worser.
Anyone have a idea what it could be before i start disambley timing belt and stuff? Im a little bit worried.
 

·
BATSLOMAN GIVES NO FUCKS.
Joined
·
5,289 Posts
take the top of the timing belt cover off and watch/listen
 
1 - 7 of 7 Posts
Top