Honda D Series Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
Build goes as follows, D15B7 Block & Crank, D16Z6 Rods and Pistons. The Combinatio comes out to 10.63:1 cr, R/S Ratio 1.62, Piston to deck height -0.090. Is this setup to good to be true? Im looking into this setup because i cant find Forged Rods for the D15 (either there isnt any made at this time or Im looking in the wrong places). Using the standard C/R SRP Forged pistons. Is this setup safe for either n/a or boost? Not wanting alot of boost just like 8psi max.

Thanx ahead for any input....
 

·
Registered
Joined
·
3,586 Posts
Z6 rods won't work on the B7 crank. There are forged rods for the D15, Crower makes them. For the price you could get a D16, eagle rods, and vitara pistons
 

·
Premium Member
Joined
·
760 Posts

·
Registered
Joined
·
741 Posts
way to far out will hit the head u also want a decnt amount of space between the head and pistons for proper detonation and rod stretch
 
1 - 7 of 7 Posts
Top