rev limiter

1 - 1 of 1 Posts

jdmcoupe850

Registered

civic

Joined Oct 10, 2006

124 Posts

Discussion Starter • #1 • Nov 17, 2006

sorry bout the double post..i posted in wrong section

i jus recently swapped my blown z6 for a jdm d15b....i finally figured out the codes and changed the air intake temp sensor...now i have no CEL's

i still have a 6500 rev limiter??

could my stock tach be off??

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

99-00 harnesses on 96-98?

General Tech

If you had a 98 ex and swapped out the harness, dash harness, and ecu with the 99 ones, would it work? If not, how do you make it work?
- 4
- 80
- G
  Goodnightythen · updated 22 hours ago
Need second opinion on AC problem in CRX.

General Tech

Need a second opinion here: I have an 89 CRX Hf that had working AC, not amazing, but it worked. I assume it was R12 as there were no converter nipples going on. A while back someone hit let head on, broke the radiator and mangled the condenser, but didn't rupture it. I decided since I was...
- 4
- 226
- JoelEspinoza · updated 24 hours ago
D15B Pulley/Harmonic Balancer help

General Tech

Hey all, Long time reader, first time poster. So, I have a 1995 Civic Ferio Vi, with a D15B (two stage vtec) engine in it. Imported from Japan, so all JDM parts. But... Something backed off the bolt on my main pulley (AKA harmonic balancer), and it got damaged. So, now to find one. Partsouq...
- 0
- 48
- robbieg · updated 2 days ago
Vitaras in a b7! so many questions ZERO answers

General Tech

For you say anything I've done the search of done four searches and after getting to the 20th page I give up . My plan is to use a D15B7 and put the Max peating rod rods which are higher at 134.5 mm which is only at half a millimeter larger than stock rods. Along with this I plan for a z6 head...
- 21
- 224
- K
  K98311 · updated 2 days ago
Honda

General Tech

Can u please guys help me with my honda ballade 1995 :unsure:
- 6
- 83
- Khosi · updated 3 days ago