Honda D Series Forum banner

1 - 2 of 2 Posts

·
Registered
94 Civic Ex Sedan
Joined
·
815 Posts
Discussion Starter #1 (Edited)
I posted a while back asking how I could accomplish having two car seats in my 5th gen (before 1996, most cars didn't have the seatbelts that lock if you pull them all the way out). Finally, after reading through my Helms manual I came across something that was a life saver. I guess honda has a way to top tether 2 car seats in every 5th gen. You have to order this part ($8 each side) to do it. It's called a child seat anchor plate. Here is the part #82410-SE3-C01. Basically, in the trunk look up and you will see two places to screw in these parts. Helm's shows how to do this. You also have to cut a 1" diameter hole in the rear shelf (unless you're car is from canada; they just have plugs you need to pull out). I am so glad I do not have to try to put new seatbelts in. Just thought I'd share this.
 

Attachments

·
Registered
Joined
·
3,314 Posts
Sorry to bump an dead thread but found this while trying to install a new child seat in the daily. Thanks OP
 
1 - 2 of 2 Posts
Top