Honda D Series Forum banner

P61 with D16y8

1K views 8 replies 3 participants last post by  the_abuse 
#1 ·
ok i have a P61 it came out of a b17. B17 has 3 stage v-tec ... now will it work with my Y8 or will v-tec be all messed up ill be tuneing with crome ?
 
#4 ·
3 stage are you talking about the intake butterflies. So you just have a another out put you can turn on and off. If you use a p30 base it will not know any different if you us a p72 turn it off.

Even if you don’t the ecu has no way to check to see if the butterflies opened or not. Its not like when vtec fails and the pressure switch doesn’t switch. :wacko:

If you want you can use that out put for nitrous a 2nd shift light.................................. Whatever you can think off with a 5 pin relay it opens all kinds off extra opportunities. If its like the p72 it grounds when off and opens when on.

A p61 is obd1 so you will need to convert.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top