Honda D Series Forum banner

P2j-2 head purchased for my d16y8 build 98ex 5 speed

559 Views 2 Replies 3 Participants Last post by  g7tunison
My previous head was p2j-6. It was trashed from a spun bearing that all the debri made it to the vtec solenoid and all thru motor. Should I use the older style head the way it is or what's the best way to make o e good head out of the 2 that I have. Are the cams the same? I can barley find any p2j-2 heads online. Cant figure that out. Will my vtec selenoid work with the older head?
Automotive tire Gas Auto part Metal Cylinder
Automotive tire Idiophone Gas Auto part Rim

Auto part Font Metal Art Machine
Wood Engineering Automotive tire Machine Hammer drill
See less See more
1 - 1 of 3 Posts
If the vtec solenoid fits it will work. It's just a pressure switch. The top comes off in case the lower half doesn't match the bolt holes on the head.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.