Honda D Series Forum banner

1 - 8 of 8 Posts

·
Registered
88 CRX
Joined
·
1,846 Posts
Discussion Starter · #1 ·
I'm at work, so I have to be brief.

Car overheated on the way to work, threw some more coolant in it (it needed alot) and it got too hot (past 3/4) as I pulled into the parking lot. Popped the hood to find a crack in my radiator.

Gonna try to get some JB Weld at lunchtime and see if I can patch it well enough to make it the 30-45min drive home.

Anyone try that before? Anything to look out for?
 

·
Registered
97 del slo
Joined
·
802 Posts
my buddy cracked where the radiator nipple comes out on top. I jb welded it and it's been working fine.
 

·
JDM Justin
95 del Sol
Joined
·
812 Posts
that sucks....

jb should work

good luck :TU: :TU:
 

·
Registered
1995 Civic EX Coupe
Joined
·
579 Posts
JB weld will hold perfectly fine, IF you let it setup long enough. if you can make it home, do it, then put the JB weld on.
 

·
Registered
88 CRX
Joined
·
1,846 Posts
Discussion Starter · #8 ·
Used PlastiWeld since it was the plastic part that cracked, held fine, thanks for the tips
 
1 - 8 of 8 Posts
Top