[94z6ex]

So i bought an entire engine gasket kit at oriellys. I was wondering if i should use the head gasket from that kit or go to the honda deal and get on from them. The eintrie kit from oriellys includes all fel-pro gaskets. Will it make a difference either way?

thanks

 

[BLK92_D16]

People rave about the OEM gasket, and plenty have use'd it and it proves it's worth the $$$. Get the Y8, it'l be cheaper than the Z6... Plus, it's 3-layer so you can remove the middle layer if you'd like to bump up compression a little...

 

[lilryanadamse]

you will be fine with the gasket that came with the kit

 

[ryan89crx]

is the Felpro a MLS gasket?

 

[94z6ex]

is the Felpro a MLS gasket?

not sure what MLS is. It is a 3 layer steel gasket..........if that helps any

 

[CrazyConscious]

not sure what MLS is. It is a 3 layer steel gasket..........if that helps any

MLS=Multi Layer Steel. You should be good with the one in the kit :TU:

 

[94z6ex]

MLS=Multi Layer Steel. You should be good with the one in the kit :TU:

thanks, ive never heard the term MLS before...............thanks for clearing it up. :TU:

 

[areskzc]

I got my z6 headgasket for $39.00 local honda dealership.
I guess they have a lot stuck in there.

 

[94z6ex]

I got my z6 headgasket for $39.00 local honda dealership.
I guess they have a lot stuck in there.

i would have got the kit at the dealers but just the head kit was $199 and the block was $99...............didnt see the point really.

 

[ryan89crx]

run the Felpro

 

[daveb91]

I run a Felpro MLS no problems!