Honda D Series Forum banner
1 - 1 of 12 Posts

· Registered
259 Posts
rhe Stealthmode kits use a brass barbed fitting to connect the return oil line to the pan. The instructions have you drill the pan and open up the hole just enough to thread in the threaded barbed fitting. You then apply copious amounts of JB Weld to both sides of the pan.

If you want a sturdy seal, that will not age or break over the years, a welded bung for either steel or aluminum is the perfect solution.

Hope that helps,

1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.