Honda D Series Forum banner

1 - 2 of 2 Posts
2

·
Guest
Joined
·
0 Posts
Discussion Starter #1
I have had this problem for a while and have been ignoring it Gas is on the rise and i feel the time is now to address it. I recently purchase an dc header. When change the header I could not get the o2 sensor out of the stock manifold . so i have been driving with no o2 sensor. When i had the original manifold installed with the 1 wire 02 sensor connected i still had an check engine light that was attributed to the 02 sensor. I have a zc sohc vtec The ecu that came with ir is a p08 and the o2 sensor that came with the engine is one wire. My harness from my cx reads 4 wire.. and the ecu reads 1 wire. So my ? is what kind of o2 sensor i buy and how would I run it
 
1 - 2 of 2 Posts
Top