[Nickstick33]

looking for some knowledge
i just swapped most of everything from a 93 dx to a 92 dx shell i had purchased.

i got everything working except the brakes. i have bled them numerous times but still have no brakes. i have great brake pressure until i start the car and it all goes away. the idle goes way up when i press the pedal but still no pressure or braking. i assume its a vacuum issue but im not sure where and how to troubleshoot it from here. brake pros help!! i do have integra rears for the discs.

 

[awebb]

Master cylinder or you have air in the lines.

 

[Sleeper Si]

how did you bleed your brakes?

 

[Zer0DazE]

Bad brake booster? - Honda-Tech
^
Read that

I'm thinking booster or check valve

 

[Nickstick33]

i bled them furthest away to closest to MC

 

[Zer0DazE]

i bled them furthest away to closest to MC

That was wrong

 

[Nickstick33]

is the sequence gonna make that big of a difference? i have no braking at all. i have good pedal pressure until the car is starting then its instant floor board

 

[awebb]

Bad brake booster? - Honda-Tech
^
Read that

I'm thinking booster or check valve

If the brake booster goes out or is bad the pedal will get stiff not soft.

 

[Nickstick33]

i got the brakes going it was the bleeders. they are still weak and mess with the idle but working