Honda D Series Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter #1

·
Registered
Honda Civic
Joined
·
2,943 Posts
10psi of boost on what turbo? You have a lot of searching to do.
 

·
Registered
Joined
·
40 Posts
Discussion Starter #4
Yes, DOHC ZC I have never built an engine. Many thread indicated low compression with various D series pistons and rods. i wuld like to keep it at 9.5 with 9-10 psi on modified jackson sc and smaller pulley tuned with demon. Considering:

SRP, Weisco or Endyn pistons
H beam rods with no block mod or little
ARP head studs for Doge Neon ( from memory)
OEM head gasket
 

·
Tape-R taper/driver
EC3, ED8, ED9, EE5
Joined
·
574 Posts
For non-aftercooled SC, I wouldn't recommend going too high of static compression as you won't have a means of cooling the cylinder charge temps.
 

·
B-series Destroyer
4g 4d civic
Joined
·
913 Posts
Lol, Big J didn't read.
 

·
Registered
91 CRX Si
Joined
·
33 Posts
I'm turbod not supercharged but my bottom end consists of wiseco pistons, eagle h beams with the arp bolts (had to notch the block and the girdle), king race rod bearings, arp head studs, and cometic headgasket
 
1 - 8 of 8 Posts
Top