Honda D Series Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
1,303 Posts
and make an diy when you know it :D
 

·
Registered
Joined
·
951 Posts
I have a 4g, i just have mine wired up to datalog with there software provided on my laptop, i dont have it wired for my car to run off of, i have o2 disabled in turboedit.
 

·
Registered
Joined
·
951 Posts
I cant find the manual and my car is a different year than yours so i couldnt tell you where to run the wire or what color is what. There website has alot of information.

I am dataloging directly to my laptop with the suplied cable, but if you wont you can wire it to the ecu and datalog on the laptop from the ecu readings.
 

·
Registered
Joined
·
951 Posts
Red = 12v supply
Blue = heater ground
White = system ground
yellow = analog out 1
brown= analog out 2
green = analog ground
black= calibration wire

If you have an older lc-1 with only 6 striped ends i also have the wirring for that
 

·
Registered
Joined
·
82 Posts
give me your email and i can email you a write up i did thats datalogging with the lc-1. maybe someday i'll get around to posting it...
 
1 - 11 of 11 Posts
Top