Honda D Series Forum banner

1 - 1 of 1 Posts

·
Registered
92 civic dx
Joined
·
84 Posts
Discussion Starter #1 (Edited)
Ok, so I want to do a wire tuck. But not the one where the wires go in the fenders. I am going to pull apart the dash, disassemble the ENTIRE harness, plug up ALL the factory grommets from the harnesses, make my own harness (keeping factory wire colors of course; for which I need 2 or 3 complete harnesses), and consolidate all the wires into ONE single plug. I want to find a watertight twist-lock harness with 40-100 pins. At least 5 of the pins have to be 12GA capable, the rest can be 16-18ga. Once I find a plug like this, I will be able to make my wire tuck work, AND I would be able to produce harnesses for sale or trade, if anyone would be interested.

So, I implore anyone.....HHEEEEELLLLLPPPP MMMMEEEEEE. I need a plug, harness, or bracket (or anything else you wanna call it) that fits the discription.
 
1 - 1 of 1 Posts
Top