Honda D Series Forum banner

1 - 20 of 81 Posts

·
Registered
Joined
·
713 Posts
Discussion Starter #1
After about 2yrs, my little project looks like it has almost come to an end. I just got the car up and running not too long ago. I have a dynosession set for Columbus Day at 3pm. Wish me luck guys! Big props to Greg at Go-Autoworks for most of the fabrication and parts and to everyone else who has made it possible.

I'm too tired to type so I'll just copy and paste the motor specs. I may have missed some details but thats all off the top of my head.

Exospeed stage4 D16A6 block
1. ARIAS forged pistons, with piston ring set, wrist pins, and locks.
2.
Eagle performance connecting Rods
3.
Exospeed Sleeved Block: Iron Ductile Open Deck Sleeve
4. Precision bore, hone, hot tank, and step deck.
5. New Genuine OEM Factory main and rod bearings, with new OEM thrust washers.
6. New Genuine OEM Factory Oil Pump
7. New Genuine OEM Factory Oil Filter
8. New Genuine OEM Factory bottom end gasket kit. Includes: Oil pan gasket, main seal, oil pickup gasket, and more.
9. Professional Assembly and measurements by our Race Engine technicians.

Exospeed stage3 D16Y8 head
1. Pre-inspection: check cylinder head for damage
2. Exospeed Port and Polish Service
3.
Aftermarket Performance Valve springs and titanium retainers(Isky or Supertech Valvetrain kits)
3. 3 Angle Valve Job
4. Resurface
5. New Genuine OEM Factory Valve Seals
6. Assembly and installation of new parts

Turbo kit
1. SLS topmount turbo manifold
2. SC6152s turbo
3. 3in downpipe (open header)
4. 2.5in aluminum I/C piping
5. Tial 38mm wastegate
6. Tial 50mm BOV
7. Large Ebay intercooler with custom backdoor (hotside)
8. Venom intake manifold
9. Blox 68mm throttle body
10. Precision 1000cc inj's
11. Walbro 255 HP fuel pump



 

·
ministry of mayhem!
93 honda integra
Joined
·
5,673 Posts
i like. very much.
 

·
Registered
Joined
·
713 Posts
Discussion Starter #6
very nice -- so clean-- love the top mount-- what r u shooting for
Atleast 450 but 500 would be nice.

Grounded said:
gorgeous. more pics.
I'll have my cousin take more pictures during and after the dynosession on Monday. He has a nice DSLR camera.

civic97 said:
nice and clean!
Thanks bro. Sorry about the clutter in the engine bay. The car had a nice wire tuck going but I had electrical issues with getting things to work right so I swapped in an entire stock engine and dash harness to make my life easier.

i like. very much.
Thanks.
 

·
formerly allnaturalrex
1989 honda crx si
Joined
·
4,639 Posts
wow very nice more pic's!!!!
 

·
Well?
Joined
·
10,814 Posts
ummm who cares if there is wires in the bay, that thing is gonna be fast as fuck
 

·
Ferio inspired
90' Civic sedan
Joined
·
2,441 Posts
:bowdown: ......that is all :beer:
 

·
Registered
Joined
·
713 Posts
Discussion Starter #19
Thanks for all the encouragement. I started to hate the car after seeing it day after day in the garage on jackstands. What do you guys think about the rims? I wasnt sure if they would look good on the car but I think it turned out fine.
 
1 - 20 of 81 Posts
Top