Honda D Series Forum banner
1 - 4 of 4 Posts

Discussion Starter · #1 ·
I have a 95 dx, and ahave a few questions;
what is the correct ecu for the mini-me, will my ecu work?
if not, what should be printed on the ecu for this to work.
Is my car already wired for the vtec? are the wires located
on the shock tower, so all i have to do is wire to that point?
if so, what are the colors. if they are on the shock tower, driver or
pasenger side?
thank you for all the info

· No more Honda's :-(
Civic CX
4,041 Posts
you can use either a p28 or a p08 ecu. you will have to run 2 wires from the ecu to the head to activate vtec.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.