Metal Bracket Sitting on Shift Linkage Bushing
1 - 6 of 6 Posts
Joined
·
4,454 Posts
Used Auto Parts Fontana CA | Salvage yards | Ecology Auto Parts
2 manuals in the lot.
with 1 integra
2 manuals in the lot.
with 1 integra
Joined
·
3 Posts
I appreciate the swift reply. I’ll go hunting for it this weekend.
Bend a piece of flat stock and drill 2 holes?
Joined
·
3 Posts
You are awesome brother. Ordered it! Thank you!
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
1989 CRX si trans issue
Transmission alleyI’m having an issue with my L3 transmission after a second gear romp with a 75 hp shot of nos. All things pointed to the nearly new clutch/pressure and flywheel but they look great. I cannot shift the gears while the engine is running but shifts fine when the engine is off. I have the case off...- 12
- 214
-
ykf7b0 · updated
-
S20 no reverse after disassembly
Transmission alleyMy friend gave me a transmission s20 non lsd and i went ahead and installed a phantom grip (don't care if it wrecks this, just want to try) Stupid me i didnt bench tested it and went ahead and install it. Gears 1 to 5 are great, shifting smoothly and no weird noises, the only problem is i cant...- 4
- 222
-
Jcrew09 · updated
-
Crx flywheel information
Transmission alleyHi guys I have a query. Are all d series flywheels the same? I’m after a flywheel and clutch for my crx 16v non vtec 1988. Ik struggling to find one at the moment direct from a crx wondered if all d series are the same from civics etc etc and if I can use a flywheel from a d15 or d16 z6 etc with...- 5
- 200
-
Clutch spring assist
Transmission alleyHey guys almost done with my build. 1995 civic ex coupe vitae’s turbo build. Should be started up in a couple days. I have a stage 5 clutch. Just bled the system and pedal feel is fine except that the first 1inch of clutch pedal travel is loose. I was wonder if I replace the 25 year old clutch...- 3
- 108
-
sirusdpx · updated
-
Anybody on here good with type clutch questions?
Transmission alleyWhat’s the difference between Sprung and Unsprung? What’s the difference between a 3-4-6 Puck? What’s the best material for a clutch disc? Is it possible to get 500 to 550 out of a steel disc clutch with a heavy duty pressure plate?- 2
- 150
-
SwappedAuto2Manual · updated
Join now to ask and comment!