Honda D Series Forum banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Recently I picked up a manual harness for my mini me swap. Y7 bottom with y8 head
I originally was using my y7 auto harness but wanted to switch to a manual y8 harness for the head iacv vtec ect. Everything plugs in besides a white plug next to my driver side Column. It’s a 8 pin style plug with only 4 pins actually in it. Looks like it runs to the core support. My auto harness had both the white and blue plug. My manual only has the blue plug. I feel as this white plug is important and I will need to repin it or get another harness. My auto harness is no good so I cannot re use it.
Gadget Gesture Finger Thumb Cable

Hood Automotive lighting Automotive tire Motor vehicle Automotive design
1 - 1 of 1 Posts