Honda D Series Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
218 Posts
Discussion Starter #1
I've been looking into doing a home built turbo set up, as sleeper as possible, and I'm going to try to make my own adapter plate using two flanges but the thing is I can't find one for a stock honda exhaust manifold (3 bolt one) I got one for free and measured the flange at 1 3/4" I believe (correct me if I'm wrong) and the only flanges I can find are 2.5" and 3". Now do you think I can get away with using the 2.5" one or do you guys think the bolts wont line up

Integra CRX Del Sol Accord 2.5'' 3 Bolt Exhaust Flange : eBay Motors (item 380204818400 end time Mar-09-10 14:17:08 PST)

this is one of them that I found, but if any one has any links to the right one please let me know

thanks guys
 

·
Registered
Joined
·
218 Posts
Discussion Starter #2
sorry if I'm not in the right section, I wasn't sure if I should have put it in this one of the FI one. but I'm sure some of you fabricators must know this
 
1 - 5 of 5 Posts
Top