Honda D Series Forum banner

Legend GS brakes into EF3 done!!

1K views 12 replies 9 participants last post by  eddcartes 
#1 ·
It was hard because we needed to do some modifications because I bought a pair of JDM EF9 knuckles. I cut 1,5cm from the inner tie rod, because toe in issues in the alignment.

Also I had minor problems when installing Prelude H22 booster and 1"MC, but was plug&play! :D

Also I needed 3mm spacers because the bracket was too close to the wheel (T28 brackets)

I used MG ZR 282mm brake discs, because the hub is the same. And put EBC Legend RedStuff pads and Motul RBF brake fluid.

And here some images! :tt2:







 
See less See more
4
#8 ·
Like said before, get better tires and do not drive to close to vehicles in front of you.

I too have the 11.1" brakes on my hatch, it took me about a month to master the new awesome brake power.
 
  • Like
Reactions: transzex
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top