Honda D Series Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
317 Posts
removed the turbo setup off of my car. NOW...im stuck with an oil pan that has had a bung welded onto it with a 3inch nipple coming out of it for the oil return hose. I put a hard rubber piece over the hole and clamped it down but when i put the stock manifold back on it was pressing against it. Now it burned off and I am losing oil hardcore. what can i do to seal it, not using rubber? The hole is about 1/2 inch in diameter.
 

·
Brokedick Millionaire
Joined
·
40,459 Posts
Discussion Starter #4
WTF does this have to do with this post?

Why not us PM's?

I've never done anything with a snail, why you asking me?
 

·
Registered
Joined
·
1,170 Posts
that shit is SUPER FUCKING FUNNY
 

·
Registered
see above
Joined
·
4,258 Posts
removed the turbo setup off of my car. NOW...im stuck with an oil pan that has had a bung welded onto it with a 3inch nipple coming out of it for the oil return hose. I put a hard rubber piece over the hole and clamped it down but when i put the stock manifold back on it was pressing against it. Now it burned off and I am losing oil hardcore. what can i do to seal it, not using rubber? The hole is about 1/2 inch in diameter.
get another pan, yay!
 

·
Resident Gunsmith & Duracoater
Ranger - work truck
Joined
·
5,467 Posts
hey bone...got a sec to help me out?
go to the parts store and get either a plug to put in the bung, or a cap and a nipple to take the hole's spot....


and, highway prophylactics rule...
 

·
Registered
97 EJ6 boosted D16Z6
Joined
·
1,079 Posts
  • Like
Reactions: transzex
1 - 13 of 13 Posts
Top