Honda D Series Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
447 Posts
Discussion Starter #1
I have a d15b7 and i need a crank pulley and other pulley stuff and some sensors for my new z6 can i use this stuff for a while and can i use my non vtec distributor instead of a vtec distributor for a while please give some info
 

·
Registered
Joined
·
3,586 Posts
Do you mean a cam gear? All you should need to do the mini-me swap is the dizzy, ECU, and to wire VTEC. There's nothing that needs to be touced on the short block.
 

·
Brokedick Millionaire
Joined
·
40,252 Posts
find a Z6 crank pulley. You can run your B7 pulley but keep the rpms low/normal, say under 5000 rpms, lower the better.

88-95 OEM cam gears are all the same.
 

·
Registered
Joined
·
447 Posts
Discussion Starter #5
i will just play it safe and wait i have a motor in the car this is just my side project
and will a y7 crank work just wondering
 
1 - 5 of 5 Posts
Top