[bigbbass451]

the serial number is L3-1570551 (off the gold sticker), PL3/3000 is on the stamp above the oil drain plug. I've researched for several hours and can't find a way to varify if this is a ZC. all the website says with those numbers it's either a SI/ZC 90-91. I need to know for sure if it's a ZC. THANKS for the help guys

 

[bigbbass451]

they slide into the holes but they won't click into position and even when they're fully up against the transmission they "wobble" they feel like they're only held in at the very tip (part farthest in) and the rest can rotate around. It's kind of hard to explain.

 

[bigbbass451]

the only thing thats that go into/from the transmission are:
the mainshaft that goes into the clutch
the 2 axles
speedo sensor
backup light sensor/switch

there's no way of identifying from the serial number or anything like that? As far as I could tell it was an SI transmission except for the fact that my axles wont go in all the way.