Honda D Series Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
0 Posts
Discussion Starter · #1 ·
I be runing goautoworks street kit in my ef. Need advice for injector size. or run stock ones Wit walbro an fuel pressure reg? Thanks guys
 

·
BATSLOMAN GIVES NO FUCKS.
Joined
·
5,033 Posts
so......why not call greg at go-auto and see what he recommends?
 

·
Registered
ej8
Joined
·
6,367 Posts
Idk where to start.
Find your max power output, then find injectors that will flow enough for that power.
I ran some ID injectors before which work great.
Also had some rdx which where very smooth .

I dont recoman stock iniectors. Just not big enough IMO.
 

·
D-series SoCal Division
93' dx hatchback
Joined
·
659 Posts
It all depends on your power requirements and the type of fuel you'll be using. There are injector calculators on the interwebs.

Personally i run IN800 on my car.
 

·
Tape-R taper/driver
EC3, ED8, ED9, EE5
Joined
·
574 Posts
  • Like
Reactions: slo_eg8

·
Registered
1992 Civic DX Hatch
Joined
·
586 Posts
I know I am a little late here, but EV14 style injectors. have some of the best low pulse width control in my experience.
 

·
Tape-R taper/driver
EC3, ED8, ED9, EE5
Joined
·
574 Posts
I'd recommend getting actual EV14 injectors, not just EV14 "style" injectors.
 
1 - 9 of 9 Posts
Top