Honda D Series Forum banner

1 - 1 of 1 Posts

·
Registered
crx
Joined
·
2,683 Posts
Discussion Starter #1
i have a question about the igniter input test. all the voltages seem to be ok but not the continuity. there is no continuity between the white and body ground and there is continuity between the blue wire and ground but with a little resistance around 1.2 ohms . i can tell that the distributer was re wired to be put back onto the harness connectors and there is a lot of oil around there. may that be whats giving me trouble?
 
1 - 1 of 1 Posts
Top